The Feiyutech FY-30A is a self-contained lightweight three axis flight stabilisation system that requires no sensors outside the model and performs in every weather condition - including complete darkness and fog. The module is mounted with Velcro tape onto the provided anti-shock mount with the printed arrow on the module pointing in the flight direction.

The FY30A can also be used as a camera stabilisation system for amateur aerial photography and also, with the new FY30A multicopter firmware (available here: http://www.feiyu-tech.com/uploads/enfile/MzQ=/20111123103800.rar) it can also be used as a multicopter controller!

The FY-30A must be connected with the following channels from the receiver: aileron, elevator, rudder and a free switch channel. Four servo cables are provided. The switch channel is a user defined switch of the transmitter, like a three position switch. It’s used to toggle the three different modes:

Mode 1:	Deactivated – normal RC control – no stabilization
Mode 2:	Control Mode – stabilisation which automatically maintains the last commanded attitude. This allows the aircraft to be easily maneuvered in a complete variety of 3D aerobatics with added stability and smoothness.
Mode 3:	Auto Stabilisation Mode – aircraft will return to horizontal level flight when the transmitter’s control sticks are centered.

The modes can be switched in flight. During the first start-up you have to check for the correct rotation directions of the servos and the rudder effect in the stabilisation mode. With the help of the three rotation potentiometers you can set the maximum deflections and the correct rotation direction. (We suggest starting with minimum deflections).

The FY-30A stabilisation system works very well and does make flying safer. Flying in higher winds and even complicated 3D flying figures is easy, even for the less-skilled pilot.

Technical data:
Input voltage: 4.0 to 6.0V
Current draw: 5 mA (5V)
Size: 55× 33 x 20mm
Weight: 19g
Temperature range: -25°C – +70°C
Maximum rate of rotation: < 1200 °/s
Application: Normal planes with or without aileron, with v-tail or standard rudders, and planes with delta mix

NOTE: This unit is fully software upgradable with the FeiyuTech USB - TTL link.

Included:
1 x FY-30A Stabiliser
5 x RC receiver connecting wires
2 x Velcro double sided tape
1 x Vibration absorbant soft pad
1 x Vibration absorbant plastic mount
1 x Pin Jumper

Nb. Colour may vary. 

• Model: 5201012
• Shipping Weight: 0.25kg
• 0 Units in Stock
• Manufactured by: Feiyutech

Current Reviews: 1