The 3D-Cam FPV literally adds a new dimension to FPV flying!
The 3D-Cam FPV uses two cameras 65mm apart (the average distance apart of a human eye) to generate field-sequential 3D video (the industry standard for 3D video). Together with our VR1400 video goggles the pilot sees the view from the aircraft in 3D which allows depth perception - particularly handy when landing, or flying close to trees, etc.
The video signal can be transmitted using standard video transmitters and can be recorded using a standard VCR or DVD recorder (DVRs which use compression may not be able to reproduce the 3D effect).
Not only does the 3D-Cam FPV bring this revolutionary 3D technology to FPV flying but it also brings another much wanted feature: In flight exposure control. Simply point the camera at the ground, let the AGC (Auto Gain Control) react so that you can see the ground as required, then flick the switch on your Tx to lock the exposure. You can also turn the camera from 3D to 2D mode and change the convergence point - all from your Tx!
Specifications:
| Image Sensors: |
1/4" CMOS |
| Resolution per camera: |
480 lines per camera |
| Sensitivity: |
3.0V/Lux-sec @ 5600K |
| S/N Ratio: |
48dB |
| Weight: |
30gr |
| Size: |
30x90mm |
| Lens: |
Standard 3.6mm CCD lenses |
| Voltage: |
5-12V |
| Current Consumption: |
105mA |
| Video Output: |
NTSC (2D mode) / Field sequential NTSC (3D mode) |
* Please note that this product is presently only available in NTSC format. Our VR1400 goggles support both PAL and NTSC as do most modern TVs and recorders. Please check that your equipment can work with NTSC signals before purchasing. Also, please note that the goggles pictured are not included - you can find them here: VR1400
