Linking the ImmersionRC EzUHF receiver to the ImmersionRC EzOSD can create a very powerful combination.
The ImmersionRC EzUHF receiver (8 channel version) will periodically inform the ImmersionRC EzOSD of the following measurements: 1. The RSSI (received signal strength) on each of the two antennas 2. The overall signal quality (which includes packet loss information) 3. Frequency error measurement (difference between Tx and Rx frequencies) 4. Error rates per frequency bin.These measurements are in turn downlinked via the telemetry stream, and may be shown on the antenna tracker LCD display, displayed in the ImmersionPlayer, or shown live using the iPad/iPhone iTelemetryFPV application. The on-screen data provides direct feedback to the pilot of any problems with the uplink in real time. The recorded telemetry stream may be used to diagnose problems after a flight, and can be a powerful tool for comparing antenna performance, antenna position, etc.This cable replaces the connection between your EzOSD current sensor and EzOSD and connects to the OSD Link connector on your EzUHF.
Current Reviews: 0