Conventional receivers have one big drawback, they only allow for a single antenna to be connected. If for some reason the reception fails there’s no backup and you lose the signal. Not so with the Duo 2400 diversity receiver. With its twin receivers it allows you to hook up two antennas and the microcontroller inside will automatically switch to the receiver with the strongest signal, without any switching noise or a change in the image received.

 

With -90dB sensitivity per receiver the Duo 2400 is sensitive, very sensitive. Paired with two flat patch antennas it will give you many miles/kilometers of range. It is engineered from an FPVer’s perspective and hence has features to match. It’ll warn you when the receiver battery runs low, or when switching antennas. The diversity receiver works best with either a 2S or 3S LiPo battery and the low voltage warning can be set accordingly, either automatically, or user configurable.

 

Equipped with two buffered AV outputs it allows you to connect your goggles, as well as your recording device, without the need for Y cables or a signal splitter. Operating the Duo 2400 Diversity Receiver couldn’t be simpler. After applying power it’ll beep the number of LiPo cells it has detected and sets the low voltage warning to match. Selecting channels is a breeze; four channels according to the frequencies used by Airwave and another six as used by Lawmate are available with the press of a button.

 

- 10 channels (4 Airwave, 6 Lawmate)

- High bandwidth video switch
- Single button control
- Dual buffered A/V outputs, view and record simultaneously

 

Download the manual here: http://www.immersionrc.com/manuals/duo2400_diversity_receiver_manual.pdf